BBO Discussion Forums: I need some help with numbers/stats - BBO Discussion Forums

Jump to content

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

I need some help with numbers/stats

#21 User is online   akwoo 

  • PipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 1,721
  • Joined: 2010-November-21

Posted 2026-May-22, 16:46

View Postjillybean, on 2026-May-22, 06:07, said:

Thanks, this is the general approach, some are interested in more detail
What are your rules for #2
#3 hopefully partner did make some other bid as we are playing a f1nt


Rules for #2:

3N and 4M are to play, both based on length rather than strength.

2N and 3M are strongly invitational; 3M with a 6 card suit and 2N without.

3lower is game forcing (as is 1H-1N-2S), supposedly a real suit. You may have to lie about 'real suit' if you want to game force on strength but don't have a second suit. (I prefer to put all my lying in 3C, but that requires further artificial sequences.)

2M promises 6. 2lower supposedly promises 4. If you have 6-4 or better, rebid 2M with an absolute minimum and 2lower with a little more.

This leaves all the not-highly-invitational hands that have 5 in the major and no lower 4 card suit. You should lie at the 2 level in your longest minor, clubs if equal. (It's possible to put all the lying into 2C, but that requires further artificial sequences.)
1

#22 User is offline   jillybean 

  • hooked
  • PipPipPipPipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 12,319
  • Joined: 2003-November-15
  • Gender:Female
  • Location:Vancouver, Canada
  • Interests:Multi

Posted 2026-May-22, 17:27

View Postpescetom, on 2026-May-22, 15:44, said:

You can also be playing 2/1 game forcing but 1NT semi-forcing, like most of Europe and a good number of top level pairs.
In which case 1NT will rarely or never have 3=card support.
There are also other ways of revealing a weak 3=card support, such as going through 1M-2 in a 2/1 context.

So 2 is not GF?
"And no matter what methods you play, it is essential, for anyone aspiring to learn to be a good player, to learn the importance of bidding shape properly. MikeH
"100% certain that many excellent players would disagree. This is far more about style/judgment than right vs. wrong." Fred
"Hysterical Raisins again - this time on the World stage, not just the ACBL" mycroft
0

#23 User is online   thepossum 

  • PipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 3,062
  • Joined: 2018-July-04
  • Gender:Male
  • Location:Australia

Posted 2026-May-22, 21:11

Apologies. I am sure nobody is interested inthe following numbers but I do not have the enerrgy to summarise

I was using Beling's bdeal with 10,000 hands and tried to cover South opening 1M in 1st or 2nd seat and West not overcalling, prepempting or doubling and North having a "forcing" 1NT hand

c= clubs, d = diamonds, h= hearts
and all the shape counts are most of the most likely shapes
shape7plusis anything wiht 7 or more in either minor
there is around 1 percent left over - mostly involving voids I guess
the reason for heart counts are first that I needed to find a bug but it is an interesting aspect of the 1NT bid
.. and I am playing SJS

c0: 35 / 10000 = 0.0035 Ań 0.00115764 (95% conf.) min: 0 max: 1 sdev: 0.0590572
c1: 283 / 10000 = 0.0283 Ań 0.00325057 (95% conf.) min: 0 max: 1 sdev: 0.165829
c2: 1157 / 10000 = 0.1157 Ań 0.00626999 (95% conf.) min: 0 max: 1 sdev: 0.319865
c3: 2371 / 10000 = 0.2371 Ań 0.00833682 (95% conf.) min: 0 max: 1 sdev: 0.425304
c4: 2824 / 10000 = 0.2824 Ań 0.00882418 (95% conf.) min: 0 max: 1 sdev: 0.450167
c5: 2024 / 10000 = 0.2024 Ań 0.00787587 (95% conf.) min: 0 max: 1 sdev: 0.401789
c6: 985 / 10000 = 0.0985 Ań 0.00584119 (95% conf.) min: 0 max: 1 sdev: 0.29799
c7+: 321 / 10000 = 0.0321 Ań 0.00345516 (95% conf.) min: 0 max: 1 sdev: 0.176266
d0: 39 / 10000 = 0.0039 Ań 0.00122176 (95% conf.) min: 0 max: 1 sdev: 0.0623281
d1: 321 / 10000 = 0.0321 Ań 0.00345516 (95% conf.) min: 0 max: 1 sdev: 0.176266
d2: 1133 / 10000 = 0.1133 Ań 0.00621304 (95% conf.) min: 0 max: 1 sdev: 0.316959
d3: 2278 / 10000 = 0.2278 Ań 0.00822134 (95% conf.) min: 0 max: 1 sdev: 0.419413
d4: 2813 / 10000 = 0.2813 Ań 0.00881372 (95% conf.) min: 0 max: 1 sdev: 0.449634
d5: 2123 / 10000 = 0.2123 Ań 0.00801597 (95% conf.) min: 0 max: 1 sdev: 0.408936
d6: 971 / 10000 = 0.0971 Ań 0.00580404 (95% conf.) min: 0 max: 1 sdev: 0.296094
d7+: 322 / 10000 = 0.0322 Ań 0.00346036 (95% conf.) min: 0 max: 1 sdev: 0.176531
h0: 116 / 10000 = 0.0116 Ań 0.00209892 (95% conf.) min: 0 max: 1 sdev: 0.107077
h1: 855 / 10000 = 0.0855 Ań 0.0054812 (95% conf.) min: 0 max: 1 sdev: 0.279624
h2: 2352 / 10000 = 0.2352 Ań 0.00831368 (95% conf.) min: 0 max: 1 sdev: 0.424124
h3: 1995 / 10000 = 0.1995 Ań 0.00783344 (95% conf.) min: 0 max: 1 sdev: 0.399625
h4: 2287 / 10000 = 0.2287 Ań 0.00823276 (95% conf.) min: 0 max: 1 sdev: 0.419996
h5+: 2395 / 10000 = 0.2395 Ań 0.00836571 (95% conf.) min: 0 max: 1 sdev: 0.426778
shape7plus=: 643 / 10000 = 0.0643 Ań 0.00480811 (95% conf.) min: 0 max: 1 sdev: 0.245287
shapem15=: 163 / 10000 = 0.0163 Ań 0.00248214 (95% conf.) min: 0 max: 1 sdev: 0.126627
shapem16=: 128 / 10000 = 0.0128 Ań 0.00220348 (95% conf.) min: 0 max: 1 sdev: 0.112411
shapem24=: 550 / 10000 = 0.055 Ań 0.00446887 (95% conf.) min: 0 max: 1 sdev: 0.22798
shapem25=: 616 / 10000 = 0.0616 Ań 0.00471287 (95% conf.) min: 0 max: 1 sdev: 0.240428
shapem26=: 548 / 10000 = 0.0548 Ań 0.00446121 (95% conf.) min: 0 max: 1 sdev: 0.227589
shapem32=: 260 / 10000 = 0.026 Ań 0.00311937 (95% conf.) min: 0 max: 1 sdev: 0.159135
shapem33=: 384 / 10000 = 0.0384 Ań 0.00376672 (95% conf.) min: 0 max: 1 sdev: 0.19216
shapem34=: 1228 / 10000 = 0.1228 Ań 0.00643353 (95% conf.) min: 0 max: 1 sdev: 0.328207
shapem35=: 1417 / 10000 = 0.1417 Ań 0.00683605 (95% conf.) min: 0 max: 1 sdev: 0.348742
shapem36=: 726 / 10000 = 0.0726 Ań 0.00508631 (95% conf.) min: 0 max: 1 sdev: 0.259479
shapem44=: 974 / 10000 = 0.0974 Ań 0.00581203 (95% conf.) min: 0 max: 1 sdev: 0.296502
shapem45=: 1290 / 10000 = 0.129 Ań 0.00657059 (95% conf.) min: 0 max: 1 sdev: 0.3352
shapem46=: 413 / 10000 = 0.0413 Ań 0.00390047 (95% conf.) min: 0 max: 1 sdev: 0.198983
shapem55=: 265 / 10000 = 0.0265 Ań 0.00314841 (95% conf.) min: 0 max: 1 sdev: 0.160617
shapem56=: 102 / 10000 = 0.0102 Ań 0.00196958 (95% conf.) min: 0 max: 1 sdev: 0.100479
shapem66=: 8 / 10000 = 0.0008 Ań 0.000554207 (95% conf.) min: 0 max: 1 sdev: 0.028273
Number of hands dealt: 360163. CPU time usage [sec]: 0.31 (x8 threads).

If anyone wonders what "Ań" means apart from a character set problem I think they aere standard errors or 1.96 of them. Not sure

EDIT small addendum. Apparently it makes 1NT 68 percent of the time plus or minus small error. No idea how bad the times it does not make are
If you have a werid 1NT hand do you risk passing and missing slam

Is David Kok on holidays :)
0

#24 User is offline   pescetom 

  • PipPipPipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 9,811
  • Joined: 2014-February-18
  • Gender:Male
  • Location:Italy

Posted Yesterday, 01:29

 jillybean, on 2026-May-22, 17:27, said:

So 2 is not GF?

It is when it is not weak :)

It asks Opener to rebid the major, which Responder will pass if weak.
0

#25 User is offline   jillybean 

  • hooked
  • PipPipPipPipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 12,319
  • Joined: 2003-November-15
  • Gender:Female
  • Location:Vancouver, Canada
  • Interests:Multi

Posted Yesterday, 06:19

View Postpescetom, on 2026-May-23, 01:29, said:

It is when it is not weak :)

It asks Opener to rebid the major, which Responder will pass if weak.

Ok, so you are not agreeing a diamond fit until the 4 level to allow for the semi forcing 1nt.
I haven’t played sf, and don’t understand the benefits.
"And no matter what methods you play, it is essential, for anyone aspiring to learn to be a good player, to learn the importance of bidding shape properly. MikeH
"100% certain that many excellent players would disagree. This is far more about style/judgment than right vs. wrong." Fred
"Hysterical Raisins again - this time on the World stage, not just the ACBL" mycroft
0

#26 User is offline   DavidKok 

  • PipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 3,447
  • Joined: 2020-March-30
  • Gender:Male
  • Location:Netherlands

Posted Today, 08:54

It depends on your assumptions and system. I've taken the liberty of using my own system, in which a 1NT response is semiforcing and denies a spade fit. Conditioning on a 1 opening by partner, a pass by RHO (so no double or overcall) and no game force, no fit and no intermediate jump shift by responder I get the following distribution of club length, simulating 100,000 occurences of this auction:
Spoiler


The distribution of diamonds is identical (except for variance due to the Monte Carlo nature of the simulation). The number of hearts is slightly higher, because I overcall 2 more easily than 2m over a 1 opening so the negative inference of the pass places more hearts with responder on average.

View Postmikeh, on 2026-May-21, 09:36, said:

The most likely, by far, is 3 clubs. Second probably 4 clubs, third 2 and fourth 5.
In particular, while this is close it is not quite in agreement with my simulations.

If I include weak spade raises, say in the 5-8 hcp range, the frequencies shift. Here's the clubs distribution again with that assumption:
Spoiler


Including the invitational range instead (so that the direct raise is 6-9, and 10-11 goes through 1NT) shifts it less from my baseline, for the people not playing Maas:
Spoiler


View Postthepossum, on 2026-May-21, 20:45, said:

We are talking a serious sim here. I am sure there must be one somewhere :)
The above simulations take between 5.7 seconds (fastest run) and 8.6 seconds (slowest run) each.

View Postpescetom, on 2026-May-22, 15:44, said:

You can also be playing 2/1 game forcing but 1NT semi-forcing, like most of Europe and a good number of top level pairs.
In which case 1NT will rarely or never have 3=card support.
I have seen people define 'semiforcing' in multiple different ways, and some people tie it to the presence of 3-card raises in the 1NT (and prefer to call it 'not forcing', regardless of range, if the response systemically denies 3-card support). Personally I was taught that we need to refer to a not forcing 1NT response in 2/1 as 'semiforcing' regardless of the potential presence of raises, to inform the opponents of the approximate 6-11 hcp range rather than the 'standard' 6-9 range.

View Postjillybean, on 2026-May-23, 06:19, said:

I haven’t played sf, and don’t understand the benefits.
I do not play a two-way 2 gadget. Still I prefer the semiforcing 1NT. A major benefit is that opener's 2m rebids promise four cards in the suit, enabling better hand evaluation by responder their second round and improving the ability to find the right contract at the 2- or 3-level. Additionally, when opener passes 1NT with 12-14 (in my case 12-13) balanced, 1NT is often a good contract. However, sometimes it is not, and the main criticism of the semiforcing 1NT is that it harms the ability of responder to bid 1NT on a very wide range of shapely hands, assured of a rebid (which they would get in a F1NT style).
0

#27 User is offline   mikeh 

  • PipPipPipPipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 13,672
  • Joined: 2005-June-15
  • Gender:Male
  • Location:Canada
  • Interests:Bridge, golf, wine (red), cooking, reading eclectically but insatiably, travelling, making bad posts.

Posted Today, 10:15

I think David and I were answering different questions. I may have misunderstood but I thought that jb wanted to know the likelihood of various club lengths in auctions that began 1S 1N 2C or 1H 1N 2C, when 1N was forcng.

Thus any calculation that caters to 0-1 club is irrelevant….opener won’t rebid 2C.

Moreover, it’s not as simple as calculating the relative frequencies of 2-6 clubs, since the 2C bid also denies various other holdings.

1S 1N 2C denies 6+ spades (technically not quite but very close), 4+ hearts and 4+ diamonds. Many hands with only 7 black cards will hold a 4+ red suit so we need to elmnate those…the only time 2C shows 2 is when opener is precisely 5=3=4=2.

And it’s a small point but David’s calculations slightly overstate the odds of having 4 clubs, since on a small number of hands opener will be 5404 or 5044, and will show the red suit.

Things are slightly trickier for 1H 1N since opener will rebid 2C with most 4=5=2=2 hands.
'one of the great markers of the advance of human kindness is the howls you will hear from the Men of God' Johann Hari
0

#28 User is offline   DavidKok 

  • PipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 3,447
  • Joined: 2020-March-30
  • Gender:Male
  • Location:Netherlands

Posted Today, 10:19

The question at the start of the thread asked for the number of clubs held by responder, not opener.
I do not play most of opener's rebids the way you do, e.g. 1-1NT; 2 denying six spades.
0

#29 User is offline   mikeh 

  • PipPipPipPipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 13,672
  • Joined: 2005-June-15
  • Gender:Male
  • Location:Canada
  • Interests:Bridge, golf, wine (red), cooking, reading eclectically but insatiably, travelling, making bad posts.

Posted Today, 12:39

View PostDavidKok, on 2026-May-24, 10:19, said:

The question at the start of the thread asked for the number of clubs held by responder, not opener.
I do not play most of opener's rebids the way you do, e.g. 1-1NT; 2 denying six spades.

I assumed JB was asking in the context of ‘standard’ 2/1, forcing 1N, in her area, which is (I think) western Canada at the moment. I have played that 2C doesn’t deny 6S, but that is very far from standard around these parts.
'one of the great markers of the advance of human kindness is the howls you will hear from the Men of God' Johann Hari
0

#30 User is online   thepossum 

  • PipPipPipPipPipPipPip
  • Group: Advanced Members
  • Posts: 3,062
  • Joined: 2018-July-04
  • Gender:Male
  • Location:Australia

Posted Today, 17:02

View PostDavidKok, on 2026-May-24, 10:19, said:

Said a lot, after I gave him the respect of mentioning him earlier
But sadly insulted me about my knowledge of sims and processing time




And his numbers are almost identical to mine - yet nobody had the decency to acknowledge them and the work and considerations I put into mine
I could post my basic script which took much longer than 8 seconds to think about and write and test - mine is just basic
When I say serious sim it would take a very long time to write all the bidding and systemic considerations

Please all of you move on from insults and disrespect - may acknowledge the effort of responding to the OP's question in detail too

My basic code is in the spoiler below to save space - some credit goes to chat GPT lol but mostly me
When I said a serious sim I was trying to be respectful to advanced players
And there could easily be a logic error in seat configurations but I do not care - not sure there would be much difference in the stats

Spoiler

0

  • 2 Pages +
  • 1
  • 2
  • You cannot start a new topic
  • You cannot reply to this topic

5 User(s) are reading this topic
0 members, 4 guests, 1 anonymous users